MR.RDX

HOW TO RECOVER BOOT LOOP IN Micromax a110 canvas 2



.There are two method to recover Bootloop

FIRST METHOD-(using SPtools  PC required)

1.first of all download the following file..and extract them
Sp flash tools
Link: http://db.tt/3JhQmUWh
Jb rom
Link: http://d-h.st/EOB
2.now remove ur fone's battery and keep it aside.
3.go to the folder where u have extracted sp flash tools. Run it as administration.
4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
6.connect ur fone to pc.
Let the process complete. After it completes reinsert the battery and switch on ur fone.
And wid this u should have successfully unbricked ur fone..

SECOND METHOD(using device recovery)

1.Download the following zip file
Link: http://d-h.st/jGx
and boot into recovery mode by pressing volume up+volume down+power buttons simultaneously.
2.Now select format data/wipe delvic cache and also wipe cache partition. Go to advanced and wipe delvic cache.
3.Now place the above zip file in ur fones sd card( u may use a memory card reader or another fone for connecting ur memory card wid pc)
4.Go to mounts and storage and select mount sd card select format system.
5.Then go back and select install zip from sd card>choose from sd card and select the above downloaded zil file.
6.After installation completes go back and select reboot system now.

thanks to jatin@1 for these steps